Rooms & Spaces/ Kitchen/ Cabinets/ Tools & Know-How/ Fasteners/

Pull-Out Trash Bin – 10 Easy Steps To Make Pull-Out Trash Bin


Convert the Under-Counter Space behind a Single Kitchen Cabinet Door and Drawer for a Hidden Pull-out Trash Bin

Leave that unsightly garbage bin hidden under the kitchen counter, put it on drawer glides to make a pull-out trash bin that lets you avoid touching during food preparation. Learn how to convert the space behind a cabinet door and drawer, leaving the raised-panel face and drawer pulls to both camouflage and access the large waste bin behind.

The spring-type assembly clamps used in this project are available from Woodcraft Supply.  Click here to see them.

Read More
sawing off the rail with a Japanese handsaw
Step 1

Remove the Cabinet Door and Drawer

Remove the cabinet door and drawer from the front of the trash bin space. Their raised panels will be reused later. Remove the existing drawer glides. Use a Japanese handsaw to cut out the rail that separates the two openings.

cutting birch veneer panels for the pull-out trash bin
Step 2

Cut All the Wooden Panels on a Table Saw

Cut out all the components for the base and sliding trash bin box on a table saw before beginning assembly. Use cabinet grade birch veneer to make each panel with a smooth paintable finish when the project is complete.

slipping a positioning clamp on a base panel
Step 3

Glue and Nail together the Three Panels for the Base

Coat the edges of the base panels with glue and lap the edges flush. Hold them together with a positioning clamp until you secure them with a pneumatic nail gun.

preparing to add the sixth panel to the trash bin box
Step 4

Assemble a Closed Box for the Sliding Trash Bin

Glue and nail six panels into a closed box for the moving portion of the pull-out trash bin. Lap the glued joints flush and hold them in place with a positioning clamp until secured with nails.

rounding the corners for the pull-out trash bin opening
Step 5

Mark a Cutline for an Opening in the Closed Box

Trace the top rim of the garbage can on the closed box. Draw a cutline for the trash bin opening 1/2-inch inside the traced line, using a roll of tape or other circular object to round the corners.

sawing along the cutline
Step 6

Drill a Starter Hole inside the Cutline

Drill a large starter hole inside the cutline for inserting the blade of your jigsaw. Cut the opening along the inside line, making a smooth cut. Remove the cutout

installing half of a drawer glide
Step 7

Install Ball-bearing Full-extension Drawer Glides on the Base and Box

Purchase two ball-bearing full-extension drawer glides. Separate each glide and mount one piece inside the base and the other one on the side of the box in corresponding positions. Paint the stationary base and the sliding box.

positioning the pull-out waste bin base against the cabinet
Step 8

Positioning the Pull-out Trash Bin Base in the Cabinet

Slip the pull-out trash bin base in the cabinet, positioning it flush against the inside of the cabinet face. Secure it by driving screws through pilot holes in the base and into to the cabinet floor beneath.

engaging the drawer glides on the base and the box
Step 9

Insert the Sliding Box to Engage the Drawer Glides

Insert the pull-out trash bin box into the base, matching the glides on the side of the box with those inside the base. The box must be movable, so no nails or screws will secure it.

reattaching the raised panel façade to the pull-out trash bin
Step 10

Pin the Original Door and Drawer Face to the Box

Attach the raised panel face from the cabinet door and drawer removed earlier. Pin them to the front of the pull-out trash bin box with a pin nailer. Secure the panels permanently from the inside of the box with screws.

Ron Hazelton Headshot

Have your project done by a local, qualified professional.


Not everyone is in a position to do a project themselves. That's why I've partnered with HomeAdvisor Powered by Angi to provide you with free quotes from qualified local professionals.


Related Tips

Blog Articles

December 14, 2021

How to Make Moveable Drawer Dividers

This technique will allow you to create drawer dividers that are moveable and adjustable for any drawer in your home.

December 03, 2021

How to Enlarge a Hole with a Hole Saw

If you've already cut a large diameter hole with a hole saw and now need to enlarge it, you'll need to know this trick in order to get it done right.

November 18, 2021

How to Make a DIY House Number Sign

In this post, I’ll show you step-by-step how I made my DIY house number sign - everything from considerations and decisions to make upfront through the whole process until completion.

Recent Articles