Improve Your View by Installing a Greenhouse or Garden Window in Your Kitchen

Put up a quality box-shaped garden window, also known as a greenhouse window, to bring in more natural light, make the room feel larger, and bring part of your garden within arm's reach in the kitchen. This model boasts dual-paned glass to maintain your heating and cooling comfort and dollars and makes the ideal setting for indoor herbs and plants.

Read More
removing the old before installing the new greenhouse window
Step 1

Remove the Sliding Glass Panel in the Old Window

Remove the sliding glass panel in the old window, grasping it with both hands, lifting it up and pulling the bottom outward off the old window track. Remove the screens the same way.

loosening the center brace in the greenhouse window project
Step 2

Lift out the Center Brace and Fixed Window Panel

Remove the center brace and remaining fixed panel as part of the greenhouse window project. Use a hammer and small pry bar to loosen the center brace. Lift the fixed panel off its track as you did for the sliding portion.

removing trim around the garden window opening
Step 3

Remove the Exterior Trim around the Opening for the Greenhouse Window

Loosen the exterior trim around the garden window opening, first scoring the heavy paint sealing the trim before levering the trim with the pry bar. The trim on the top, bottom, and both sides must be removed.

loosening the frame during the garden window project
Step 4

Score the Caulking and Remove the Old Aluminum Window Frame

Pre-cut the caulk that seals the aluminum window frame. Tap with a wood block and hammer from the inside to break the seal and loosen the window frame for removal. It will not be used in the greenhouse window installation.

prying nails out of the frame during the greenhouse window project
Step 5

Use a Nail Remover to Free the Wooden Window Frames

Drive the small prongs of a nail remover under the nails holding the old wooden window frames. Lever the heads until the nails can be extracted with the larger prongs. Remove the frames which are not required for the greenhouse.

trimming the opening for the greenhouse window
Step 6

Dress the Edge of the Opening for the Greenhouse Window

Build up and finish the interior edge of the window opening that will be visible through the new greenhouse window. Nail up spacers/shims to level and then add a two-by-four to the bottom and trim along the top and sides.

sawing siding to prepare for the garden window
Step 7

Expose the Front Edge of Perimeter Two-by-fours

Cut away the wooden siding to expose the front edge of two-by-fours at the window's perimeter. The nailing flange of the new greenhouse window will be secured to the front edge of the two-by-fours.

waterproofing the greenhouse window project
Step 8

Waterproof the Window Opening with Flashing Paper and Caulk

Waterproof the greenhouse window opening with flashing paper and caulk, inserting the flashing paper behind the sheathing, folding the edge back over the siding and taping it temporarily. Caulk generously along the wooden edge of the opening.

driving screws into the nailing flange on the greenhouse window
Step 9

Position and Secure the Greenhouse Window in Place

Insert the garden window into the opening and secure it with rust-proof screws driven through the nailing flange into the two-by-four framing beneath. Caulk the edges. Remove the tape and fold the flashing paper over the nailing flange.

adding trim to the greenhouse window
Step 10

Dress the Edges of the Greenhouse Window

Finish the edges of the greenhouse window, nailing filler strips over the nailing strip to provide a nailing surface for the new trim. Caulk the backs of the trim and secure them in place. Paint to match.

Ron Hazelton Headshot

Have your project done by a local, qualified professional.


Not everyone is in a position to do a project themselves. That's why I've partnered with HomeAdvisor Powered by Angi to provide you with free quotes from qualified local professionals.


Related Tips

Blog Articles

December 14, 2021

How to Make Moveable Drawer Dividers

This technique will allow you to create drawer dividers that are moveable and adjustable for any drawer in your home.

December 03, 2021

How to Enlarge a Hole with a Hole Saw

If you've already cut a large diameter hole with a hole saw and now need to enlarge it, you'll need to know this trick in order to get it done right.

November 18, 2021

How to Make a DIY House Number Sign

In this post, I’ll show you step-by-step how I made my DIY house number sign - everything from considerations and decisions to make upfront through the whole process until completion.

Recent Articles