How to Hang a Picture Level and Exactly Where You Want It

If you're fed up with pictures that hang askew at odd angles, well, here's my technique for hanging pictures level, so they'll stay level.

Begin by holding the picture where you want it to hang and make a small pencil mark along the top of the frame at the center. Spread your thumb and forefinger until they're five inches apart, then hook them under the hanging cable on the back side of the artwork. Pull up until the cable is taut.

Then measure the distance from the cable to the top edge of the frame. Now, measure down from the original mark on the wall the same distance, in this case, about two and a quarter inches, and make a second mark. This is where the cable will touch the wall behind the picture.

Using a level, draw a line from this mark, about three inches to either side of the center. Then measure from your center mark, two-and-a-half inches to the left......and two-and-a-half inches to the right.

Align the bottom of a picture hanger (not the nail that holds the hanger) with each of these two marks, and secure each of them to the wall.

If you want to make doubly sure that your pictures won't budge, try adding small, rubberized bumper stickers to the bottom corners.

The double-hanger approach that will keep your picture from getting out of kilter.
Careful measurements and two hooks... enough to keep your pictures right where you want them -- on the level.

Ron Hazelton Headshot

Have your project done by a local, qualified professional.

CLICK HERE FOR A FREE QUOTE

Not everyone is in a position to do a project themselves. That's why I've partnered with HomeAdvisor Powered by Angi to provide you with free quotes from qualified local professionals.

comments

Blog Articles

December 14, 2021

How to Make Moveable Drawer Dividers

This technique will allow you to create drawer dividers that are moveable and adjustable for any drawer in your home.

December 03, 2021

How to Enlarge a Hole with a Hole Saw

If you've already cut a large diameter hole with a hole saw and now need to enlarge it, you'll need to know this trick in order to get it done right.

November 18, 2021

How to Make a DIY House Number Sign

In this post, I’ll show you step-by-step how I made my DIY house number sign - everything from considerations and decisions to make upfront through the whole process until completion.


Recent Articles