If you like to do woodworking projects and especially cabinet making, then chances are you're gonna be driving a lot of screws.  So that means drilling pilot holes, counter sinks and driving the screws themselves in.  Now there are a couple ways to do this.

The first way is the triple tool time-consuming better not be in a rush method, and that goes something like this - you start out with a counter sink. Take that out.  Put in your pilot bit.  Take that out.  Install a driver bit.

And finally, drive in the screw.  Or you might consider this. This is a multi purpose bit and driver.  It's all built into one.  It has a pilot bit, a countersink and a screwdriver. And to use it, you drill one hole. Take the drill and the countersink off. And drive in the screw. So what's it gonna be? A triple threat or fast and easy?

Ron Hazelton Headshot

Have your project done by a local, qualified professional.

CLICK HERE FOR A FREE QUOTE

Not everyone is in a position to do a project themselves. That's why I've partnered with HomeAdvisor Powered by Angi to provide you with free quotes from qualified local professionals.

comments

Blog Articles

December 14, 2021

How to Make Moveable Drawer Dividers

This technique will allow you to create drawer dividers that are moveable and adjustable for any drawer in your home.

December 03, 2021

How to Enlarge a Hole with a Hole Saw

If you've already cut a large diameter hole with a hole saw and now need to enlarge it, you'll need to know this trick in order to get it done right.

November 18, 2021

How to Make a DIY House Number Sign

In this post, I’ll show you step-by-step how I made my DIY house number sign - everything from considerations and decisions to make upfront through the whole process until completion.


Recent Articles