Build a Wood Baby Cradle A Few Easy Steps
Build a Beautiful Wooden Cradle for Your Baby
Follow these simple woodworking plans to construct a rocking wooden cradle that can be painted or stained. Seven main pieces are cut from solid 1-inch wood panels and then assembled with glue and countersunk screws hidden under wooden plugs. The cradle bottom is secured on narrow rails and provides additional structural support to the baby bed.Read More
Plan the Design and Dimensions of the Baby Cradle
Draw the plans for the wooden cradle on paper and mark the dimensions of each component. The project requires cutting a headboard, footboard, two sides, a bottom, two rockers, and narrow wooden strips to support the bottom.
Prepare a Full-Scale Drawing of the Curved Cradle Components
Make full-sized paper drawings of the curved headboard, footboard, and rockers. Spray adhesive on the back, turn them over, and glue the drawings onto 1/4-inch hardboard, smoothing them from the center outward to avoid wrinkles.
Cut out the Shapes to Make Hardboard Templates
Cut along the lines of the drawing. Use a band saw and cut through the paper and hardboard to make light-weight but stiff templates.
Trace the Templates onto Solid Wood Panels
Trace the shape of each template with a pencil to mark cut lines on the solid wood panels. Be sure to keep the templates aligned with the grain of the wood.
Cut All the Curved and Rectilinear Cradle Parts
Cut each cradle component, cutting along the trace lines for the curved parts and carefully measuring and marking for the rectilinear pieces.
Install One-by-one Wooden Strips to Support the Bottom
Cut one-by-one wooden strips to attach at the bottom of the headboard, footboard, and both sides to support the cradle bottom. Glue and secure the strips with screws.
Attach the Sides to the Headboard and Footboard
Apply glue to one edge of the headboard and butt it against the inside edge of one side panel. Insert screws through pre-drilled countersunk holes to secure the pieces. Repeat to attach the footboard and second side.
Attach the Cradle Bottom to the Support Strips
Drop the bottom into the cradle from the top after pre-drilling countersunk screw holes around the perimeter. Insert screws to attach the bottom to the support rails.
Secure the Rockers to the Underside of the Cradle
Apply glue to the tops of the rockers and position them against the underside of the cradle under predrilled and countersunk screw holes. Insert screws to secure them.
Glue Wooden Plugs in Each Countersunk Screw Hole
Dab a little glue in each screw hole and position a wooden-plug in each. Tap each plug gently with a hammer to seat it in the hole.
Have your project done by a local, qualified professional.
CLICK HERE FOR A FREE QUOTE
Not everyone is in a position to do a project themselves. That's why I've partnered with HomeAdvisor Powered by Angi to provide you with free quotes from qualified local professionals.
This technique will allow you to create drawer dividers that are moveable and adjustable for any drawer in your home.
If you've already cut a large diameter hole with a hole saw and now need to enlarge it, you'll need to know this trick in order to get it done right.
In this post, I’ll show you step-by-step how I made my DIY house number sign - everything from considerations and decisions to make upfront through the whole process until completion.